Publications

Austroads Technical Specification ATS 5341 sets out the requirements for the repair of cracks in concrete, including supply and quality of materials, surface preparation, application, relevant testing and acceptance criteria. The technical…

Guide to Pavement Technology Part 2: Pavement Structural Design provides advice for the structural design of sealed road pavements. The advice has been generally developed from the approaches followed by the Austroads member agencies. However, as it…

The use of stabilisation technology for stabilising and recycling materials for pavement construction and maintenance is widely accepted as a cost-effective method of improving long‑term performance and reducing whole-of-life costs of modern,…

Guide to Pavement Technology Part 4C: Materials for Concrete Road Pavements summarises aspects of Australian and New Zealand practice in materials for use in concrete road pavements including: base concrete and lean-mix concrete subbase concrete…

Part 8 of the Guide to Pavement Technology provides advice on the general requirements for the management of quality assurance, construction planning, earthworks, subsurface drainage, unbound pavements, stabilised pavements, sprayed bituminous…

Guide to Pavement Technology Part 3 addresses the selection of the most appropriate pavement surfacing. The Guide identifies the significant factors that need to be considered in the selection of the most appropriate surfacing, their inter-…

Part 4C of the Guide to Pavement Technology summarises aspects of Australian practice in materials for use in concrete road pavements including base concrete and lean mix concrete subbase, concrete curing compounds, steel reinforcement including tie…

Controlling the moisture content of pavements during construction reduces the risk of damage to the pavement. This technical note provides advice related to specifying, constructing and testing pavements.

This technical note covers factors that can be considered in the design process and how they affect the performance of the stabilised materials.