Publications

Filter
Topic
Publication State
Showing 1 - 10 of 15 Publications
Development of a Specification for Recycled Crushed Glass as a Sand Aggregate Replacement
This report presents the technical basis for the development of the Austroads technical specification and guideline for the use of recycled glass in bedding, backfilling material, concrete, road drainage, embankment fill, and landscaping…
Accelerated Evaluation of the Effectiveness of Supplementary Cementitious Materials to Suppress Damaging AAR Expansion in Concrete Structures

This report provides the results of testing of three potentially reactive aggregates by the accelerated mortar bar test (AMBT) and the concrete prism test (CPT).

The tests were conducted using reference mixes, which contained plain Portland cement as…

Improved Laboratory Characterisation of the Deformation Properties of Granular Materials

This report examines the capacity of the extra-large wheel-tracking laboratory test method to predict the in-service performance of granular materials.

Rutting is a common distress mode of unbound granular bases under thin bituminous surfacings.

Five…

Realising 100-year Bridge Design Life in an Aggressive Environment: Review of the Literature

This report details a literature review on durability issues that affect the service life of reinforced concrete structures.

The review focused on information from sources within Australia and overseas, including published literature, standards,…

Update of Double / Double Design for Austroads Sprayed Seal Design Methods

This document is an update of the design procedure for double/double sprayed seal surfacing. The information supersedes that in Update of the Austroads Sprayed Seal Design Method(Austroads 2006), and replaces Sections 6, 7 and 8 in that document.

Establishing a Reference Aggregate for Aggregate Polishing Tests

Polished aggregate friction value (PAFV) tests are used by most jurisdictions in Australia to determine the resistance of aggregates to the polishing action of vehicle tyres on the road. Two versions of the PAFV test are used in Australia: the…

A New Reference Aggregate for PAFV Testing

This report describes studies of the effects of test conditions on vertical polished aggregate friction value (PAFV) results and the results of a proficiency study which was conducted to determine a preliminary PAFV value for UK aggregate. The…

Aggregate Wetting and Initial Adhesion of Sprayed Sealing Binders

Cutting solvents have been traditionally added to binders used in sprayed sealing in Australia and New Zealand to ensure that effective adhesion occurs between binder and aggregate. Recent Polymer modified binder (PMB) sealing failures, which have…

Aggregate Wetting Experiments and Effects on Recommended Polymer Modified Binder Cutter Levels

The work described in this report determines updated cutter level recommendations for S10E and S20E binders. Studies were also conducted to investigate the relationship between the contact angle of water on films of bitumen and PMB binders, and…

Bridge Design Guidelines for Earthquakes

Despite the fact that the occurrence of large earthquakes in Australia is rare, the consequences can be fatal and costly. The performance of bridges during and after earthquake events is critical in ensuring that road networks remain operational and…