Publications

This document provides a hyperlinked list of the Austroads Test Methods and Specifications.

Austroads Technical Specification ATS 3050 sets out the minimum requirements for the manufacture and supply of recycled crushed glass (RCG) for use in the following applications: As a granular material, including: bedding and haunching of pipes and…

This webinar, presented by Dr James Grenfell and Dr Didier Bodin, focuses on the development of a specification on the supply of recycled crushed glass sand as part of a project to support increased use of recycled crushed glass (RCG) in road…

This method describes the procedure for obtaining a measure of the evenness of a pavement surface as determined by the deviation from a three metre straightedge. It is applicable only to the measurement of depressions in the pavement surface and to…

The purpose of this guideline is to provide potential recyclers with the information they need to gain a better understanding of how recycled crushed glass (RCG) should be processed to make it fit-for-purpose for infrastructure applications. This…

This report presents the technical basis for the development of the Austroads technical specification and guideline for the use of recycled glass in bedding, backfilling material, concrete, road drainage, embankment fill, and landscaping…

Austroads Technical Specification ATS 3120 sets out the requirements for the supply of aggregates used for sprayed bituminous surfacing work. The technical specification can also be downloaded as a Word document.

This test method provides an overview of the 

This test method is for bitumen sprayers as specified in AGPT/T530 Calibration of bitumen sprayers: 

This test method sets out the procedure for validating the calibration fluid. The calibration fluid is used for volumetric calibration of bitumen sprayer pumps (AGPT/T531), and also for two methods of determining transverse distribution of bitumen…