Publications

Filter
Publication State
Showing 1 - 9 of 9 Publications
Low Cost Interventions to Encourage Cycling: Selected Case Studies

This report contains 15 case studies showcasing low cost interventions that have successfully encouraged cycling in Australia and New Zealand.

Engineers and behaviour change specialists are implementing a range of innovative low-cost infrastructure…

Cycling Infrastructure: Selected Case Studies

This report contains 29 case studies showcasing innovative Australian and New Zealand urban and regional bicycle infrastructure.

The design of the built environment to support active transport is an emerging discipline. Urban planners, designers as…

Westgate Footbridge, Auckland New Zealand
The Westgate footbridge provides a new pedestrian and cyclist connection across four carriageways of State Highway 16 near the Westgate Shopping Centre in Auckland, NZ. The bridge is 3 m wide and consists of three separate structures
Review of AS 5100.2: Design Loads
AS 5100, the Australian Bridge Design Code, is currently under review. AS 5100.2, Design Loads, sets out the minimum design loads, forces and load effect for road, railway, pedestrian and bicycle bridges and other associated structures.The review of…
The New Zealand Transport Agency Guide to Bridge Painting
The New Zealand Transport Agency (Transport Agency) has recently published ‘Protective Coatings for Steel Bridges: A Guide for Bridge and Maintenance Engineers’. This was prepared by the authors to optimise the long-term capital and maintenance…
Establishing Compliance of Steel Mill Products: A Comparison Between Australian Steel Standards and the Corresponding American Standards
Australian steel standards have stringent requirements in regard to product conformity. According to Australian structural steel standards, the acceptance of steel is conditional on the evidence of compliance provided in rigorous mill test reports/…
Changes in The Standards for Managing Corrosion of Bridges in the Future
This paper describes the changes made to two of the Australian Standards, AS/NZS 2312:2002 – ‘Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings’ and AS 2832.1:2004 – ‘Cathodic protection of…
National Cycling Strategy: Implementation Report 2013
In July 2014 the Australian Bicycle Council published a report that outlines the progress made on the National Cycling Strategy in 2013.
Assessment of the Effectiveness of On-road Bicycle Lanes at Roundabouts in Australia and New Zealand
This report documents the research undertaken for Austroads on bicycle lanes at roundabouts. An extensive literature review informed empirical data gathering.The literature review revealed strong evidence that bicycle lanes on the approach and…