Publications

Filter
Topic
Publication State
Showing 1 - 10 of 13 Publications
Webinar: Outcomes from the Long-Term Monitoring of Austroads Sprayed Seal Trials
Flexible granular pavements protected by sprayed seal surfacings are the backbone of the Australian and New Zealand road networks. Road agencies in Australia and New Zealand have therefore been focused on producing quality, long-lasting sprayed seal…
Alkali-Silica Reactivity of Aggregate - Concrete Prism Test
This Test Method determines the susceptibility of aggregate to an expansive reaction when mixed with cement in a concrete mix. It measures the change in length of concrete prisms containing the aggregate under investigation. This Test Method is not…
Alkali-Silica Reactivity of Aggregate – Accelerated Mortar Bar Test
This Test Method determines the susceptibility of aggregate to an expansive reaction when mixed with cement in a concrete mix. It measures the change in length of representative mortar bars containing the aggregate under investigation during storage…
Inspections of Polymer Modified Binder Trial Sites and Ageing Properties of Binders
This report presents the findings of site inspections and binder ageing performance studies associated with two Austroads sprayed seal trial sites constructed near Coober Pedy, South Australia and Cooma, New South Wales. These trials were…
Anti-Graffiti Coatings
Austroads Technical Specification ATS 5820 specifies the requirements for the supply and application of anti-graffiti coating systems to structures, roadside furniture and traffic controller boxes. It excludes the application of coating systems to…
Effectiveness of Anti-Graffiti Coatings
This test method determines the performance of anti-graffiti coatings and is based on Main Roads Western Australia Testing Method for Anti-Graffiti Coatings 6706-02-2238. This Test Method assesses the following properties: ease of removing graffiti…
Supply and Placement of Steel for the Reinforcement of Concrete
Austroads Technical Specification ATS 5310 sets out the requirements for the supply, fabrication, handling and placement of steel used for the reinforcement of concrete (&lsquo
Cathodic Protection of Concrete Structures
Austroads Technical Specification ATS 5390 sets out the requirements for the cathodic protection (CP) of steel in atmospherically exposed, buried and submerged concrete. It covers both new and existing structures and includes: assessment of existing…
Rubber Content of Crumb Rubber Modified Bitumen: Soxhlet Method
This test method sets out the procedure for determining the rubber content of a crumb rubber modified binder using a Soxhlet extraction apparatus. This test method is applicable to crumb rubber modified binders used in constructing and maintaining…
Coating of Concrete
Austroads Technical Specification ATS 5343 sets out the requirements for the application of decorative and protective surface coatings to concrete, including supply and quality of materials, surface preparation, application, relevant testing and…