Publications

The purpose of this literature review is to assess the current body of research for the incorporation of recycled material in pavements to inform updated guidance to the current Austroads Guide to Pavement Technology Part 4E: Recycled Materials. New…

This report presents the findings of a project that evaluates the fatigue performance of foamed bitumen stabilised (FBS) pavements under accelerated loading. Using accelerated pavement testing, the project evaluated three FBS host materials (100%…

This report documents the technical basis of the 2010, 2012 and 2017 editions of Austroads&rsquo

This report presents the findings of site inspections and binder ageing performance studies associated with two Austroads sprayed seal trial sites constructed near Coober Pedy, South Australia and Cooma, New South Wales. These trials were…

This study investigated the relationship between cutter oil properties and sprayed seal performance so that this information could be used as a basis for updating Australian Standard 3568. AS 3568 specifies the properties of four different types of…

This report examines the viability of using recycled plastics in asphalt and sprayed seals by Australian and New Zealand road authorities. The report presents the findings of a literature review, including case studies of local and overseas road…

This report presents the results of a research project commissioned by Austroads to investigate whether the currently used Australian general-purpose (GP) cement which complies with AS 3972, and which may contain up to 7.5% limestone as a mineral…

This report presents the results of a field validation study conducted as part of the development of a new long term ageing test for polymer modified binders used in sprayed seals in Australia. Unaged samples of binders were collected during the…

This document sets out the performance requirements expected of bitumen sprayers operating in Australia and New Zealand.

For a consistent and high quality of sprayed sealing work to be undertaken, and for sprayed sealing to remain a viable surfacing…

The Australian polymer modified binder (PMB) specification (AGPT/T190) currently requires different binder grades to be used in sprayed sealing and asphalt applications. This study compared the sprayed seal performance of PMBs representing four AGPT/…