Publications

This protocol specifies the method for sampling bituminous slurry mixture from the slurry paving unit at the paving site.

This test method sets out the procedure to evaluate the wearing resistance of bituminous slurry surfacing materials under wet abrasion conditions.

This test method sets out the procedure to evaluate bituminous slurry materials for their propensity for binder flushing after subjecting to loaded wheel tracking cycles.

This test method sets out the method for the determination of the setting and curing characteristics of a bituminous slurry as a function of the cohesive strength developed in the mixture with time.

This test method sets out the procedure to determine the consistency of a bituminous slurry that is then used to optimise the amount of water required to form a workable mixture. This test may not be applicable to certain microsurfacing mixtures due…

This webinar, presented on 1 May 2018, outlines the findings of an Austroads geopolymer concrete project and a current update of the use, monitoring and specification of geopolymer concrete by VicRoads over the past nine years. The webinar was…

To ensure that bridges are properly constructed in accordance with the design drawings and specifications, engineers need to be well-informed on all aspects of their design and construction, including awareness of the problems that may arise and the…