Publications

The report provides a summary of works undertaken during the period 2017&ndash

This protocol specifies the method for sampling bituminous slurry mixture from the slurry paving unit at the paving site.

This test method sets out the procedure to evaluate the wearing resistance of bituminous slurry surfacing materials under wet abrasion conditions.

This test method sets out the procedure to evaluate bituminous slurry materials for their propensity for binder flushing after subjecting to loaded wheel tracking cycles.

This test method sets out the method for the determination of the setting and curing characteristics of a bituminous slurry as a function of the cohesive strength developed in the mixture with time.

This test method sets out the procedure to determine the consistency of a bituminous slurry that is then used to optimise the amount of water required to form a workable mixture. This test may not be applicable to certain microsurfacing mixtures due…

This report presents the proposed future directions for long-term pavement performance (LTPP) studies in Australasia. The proposed way forward is based on the results of a 2017 survey directed to the LTPP Project Steering Group (PSG) and Assets Task…

The aim of this project was to clarify the effectiveness of pavement maintenance (preservation) activities, in the form of periodic maintenance and rehabilitation, on pavement condition and distress (roughness, rutting and cracking) deterioration…

The report provides a summary of works undertaken during the period 2016–17 for the Austroads project AT1064 – Long-term pavement performance (LTPP).

Austroads has funded the long-term pavement performance study since late 1994. The project monitors…

Part 4B of the Austroads Guide to Pavement Technology provides a recommended approach to the design and characterisation of asphalt mixes in Australia and New Zealand. However, the approach to asphalt mix design and performance characterisation…