Publications

In Australia and New Zealand, bituminous binders used in road construction are tested prior to use to ensure they will perform satisfactorily during road construction/maintenance. Some of the Australian Standards that are used for these tests have…

This test method describes the procedure for determining the cone penetration of a joint sealant at 25 

This test method describes the procedure for determining the resistance of hot poured joint sealants to flow at a temperature of 70 °

This test method sets out the procedure to be used to prepare joint sealant samples for testing.

This test method describes the procedure for determining the degree to which a joint sealant is degraded by heat during prolonged storage (6 

Austroads has updated the Guide to Road Design Part 6: Roadside Design, Safety and Barriers (AGRD Part 6) introducing new sections on the fundamentals of safety barrier systems and design advice for other road safety devices. This webinar, presented…

Austroads has updated the Guide to Road Design Part 6: Roadside Design, Safety and Barriers (AGRD Part 6) introducing new sections on the fundamentals of safety barrier systems and design advice for other road safety devices. This webinar, presented…

This research report documents changes to Edition 3.2 of the Austroads Guide to Road Design Part 6: Roadside Design, Safety and Barriers, and in particular, Sections 4, 5 and 6. This research report also provides background information to the…

Guide to Road Design Part 6: Roadside Design, Safety and Barriers provides guidance on roadside design and in particular guidance on evaluating the risk of a roadside and the selection and use of road safety barrier systems. Roadsides have to…

This test method sets out procedures for the preparation of asphalt specimens and measuring the change in indirect tensile strength resulting from the effects of moisture and freeze/thaw conditioning. The results can be used to assess the propensity…