Publications

This webinar, presented on 9 November 2018, provides an overview of an Austroads study to develop suggested good practice for a consistent, efficient and safe approach to emergency egress signage within Australasian road tunnels.

This report provides guidance on consistent, efficient and safe design of emergency egress signage and operations in road tunnels. While there are Australian Standards relating to emergency egress signage, these were not originally intended for use…

Guide to Road Tunnels Part 1 outlines the structure of the Guide to Road Tunnels, while also introducing road tunnel planning. Part 1 describes key issues and considerations related to the implementation process, road tunnels in the context of a…

This protocol specifies the method for sampling bituminous slurry mixture from the slurry paving unit at the paving site.

This test method sets out the procedure to evaluate the wearing resistance of bituminous slurry surfacing materials under wet abrasion conditions.

This test method sets out the procedure to evaluate bituminous slurry materials for their propensity for binder flushing after subjecting to loaded wheel tracking cycles.

This test method sets out the method for the determination of the setting and curing characteristics of a bituminous slurry as a function of the cohesive strength developed in the mixture with time.

This test method sets out the procedure to determine the consistency of a bituminous slurry that is then used to optimise the amount of water required to form a workable mixture. This test may not be applicable to certain microsurfacing mixtures due…