Publications

This protocol specifies the method for sampling bituminous slurry mixture from the slurry paving unit at the paving site.

This test method sets out the procedure to evaluate the wearing resistance of bituminous slurry surfacing materials under wet abrasion conditions.

This test method sets out the procedure to evaluate bituminous slurry materials for their propensity for binder flushing after subjecting to loaded wheel tracking cycles.

This test method sets out the method for the determination of the setting and curing characteristics of a bituminous slurry as a function of the cohesive strength developed in the mixture with time.

This test method sets out the procedure to determine the consistency of a bituminous slurry that is then used to optimise the amount of water required to form a workable mixture. This test may not be applicable to certain microsurfacing mixtures due…

This method sets out recommended procedures for mixing, compacting, conditioning and trimming asphalt to provide homogeneous specimens suitable for wheel track testing, beam flexure testing, resilient modulus testing and other asphalt…

This test method sets out the procedures for determining particle loss (abrasion) from laboratory prepared specimens of open graded asphalt. The test may be performed on dry samples or after period of moisture conditioning.

This method details the determination of the binder content of asphalt mixes by ignition at a temperature of not less than 540°C and the subsequent determination of the particle size distribution by sieve analysis.

This test method sets out the calculation procedures for the determination of a Binder Film Index. The test is applicable to all types of asphalt.

Asphalt characterisation tests require equipment that is well maintained and correctly adjusted. The procedures described in this document will provide a means of verifying that a Gyropac gyratory compactor is in a suitable working condition to…