Publications

Showing 1 - 10 of 228 Publications
Comparative Study of Grillage Analogy and Finite Element Method for Bridge Heavy Load Assessment
Grillage analogy is a popular method for analyzing various types of highway bridges in design offices. For load assessment of existing bridges in Australia, mainly beam line model and grillage analogy are employed to evaluate the structural…
Citylink Tulla Widening Project English Street Bridge Demolition and Construction
As part of the CityLink Tulla Widening (CTW) project, the English Street Bridge will be reconstructed to accommodate the widened Tullamarine Freeway and improve access to Essendon Fields. The reconstructed English Street Bridge will be a single span…
Management of Heavy Vehicle Access to Bridges
Australia has regularly reviewed access to the road and bridge network with a view to increasing transport productivity. The current access regime for heavy vehicles has evolved over time with access now controlled by a range of regulations, notices,…
Introduction of E Class Trams on Melbourne's Tram Network and the Impact on VicRoads' Bridges
Over recent years, Public Transport Victoria through its operator Yarra Trams, has been gradually introducing new class trams (of which the E Class is the heaviest and longest) on Melbourne’s tram network.
Strengthening of Bridges for Higher Productivity Freight Vehicles
Currently there is pressure from the freight industry to allow higher performance freight vehicles (HPFV) the use of major transport routes, particularly between the major centres of Brisbane, Melbourne and Sydney. An initial review of the existing…
A Drift and Displacement Based Seismic Assessment Method for Bridge Abutments
The present study is concerned with the drift and displacement based seismic assessment of bridge abutments. This study is distinguished from previous research that has been reported in the literature in that what is of primary interests is the…
2017 Revision of Australian Standard AS 5100 Part 2: Design Loads
Part 2 Design loads of Australian Standard AS 5100 Bridge design sets out the parameters for loads on all bridges in Australia. There have been numerous enhancements to improve the scope, clarity and intent. Design loads for road traffic barriers…
Strengthening and Widening of the Maribyrnong River Bridges
The Maribyrnong River Bridges (also known as E.J. Whitten Bridge), is Victoria’s second largest road bridge being a 520 m long ten span structure that carries the M80 Ring Road over the Maribyrnong River in the outer western suburbs of Melbourne.…
Operational and Inventory Management of Bridges
Theoretical assessments of a bridge network to AS5100.7 identify many bridges operating at margins smaller than those embodied in AS 5100.7. The cost of strengthening these bridges is unpalatable and the consequences of restricting access are…
Angellala Creek Bridge: Explosion to Bridge Reconstruction with a BIM Future
On the night of 5th September 2014 a road-train transporting 52 tonnes of ammonium nitrate crashed next to the Angellala Creek Bridge. The bridge is approximately 30km south of Charleville, on the Mitchell Highway in outback Queensland. The incident…