Publications

Showing 1 - 10 of 26 Publications
Life Extension of Aging Railway Bridges: A Case Study of the Burnett River Bridge
The North Coast Rail Line in Queensland between Bundaberg and Gladstone has three major crossings over the Burnett, Kolan and Boyne Rivers. The bridges were constructed in the 1890s using cast iron piers and through-girder spans. Queensland Rail…
Evaluation and Strengthening of Existing Bridges to Carry Increased Vehicle Weights
Detailed investigation and live-load evaluation was undertaken for several 1930s reinforced concrete bridges followed by strengthening where required.
Movable Span Bridges of NSW: A New Classification System
NSW Roads and Maritime Services manage 26 movable span bridges of which 11 are still operational. These bridges were the subject of a recently completed study undertaken jointly by RMS and GHD Newcastle which focused on the components of each bridge…
Review of AS 5100.2: Design Loads
AS 5100, the Australian Bridge Design Code, is currently under review. AS 5100.2, Design Loads, sets out the minimum design loads, forces and load effect for road, railway, pedestrian and bicycle bridges and other associated structures.The review of…
Improving Victoria’s Rail Network Through Innovative Structural Design
The Regional Rail Link is a $4.8 billion, joint Commonwealth and Victorian Government funded infrastructure project designed to remove major bottlenecks in Victoria’s rail network by separating regional and metropolitan trains as they travel from…
Regional Rail Link Deer Park to West Werribee Junction, Road Bridges, Victoria
The Regional Rail Link (RRL) project is Victoria’s largest rail infrastructure project providing 47.5 km of new dual railway tracks for dedicated V/Line regional rail services between Southern Cross Station and West Werribee Junction via Sunshine…
Fatigue-Detailing of Skewed Steel Through-Girder Rail Bridges: Regional Rail Project, Melbourne
The south-west of Melbourne has experienced huge residential development, and a corresponding increase in rail patronage. The Regional Rail Project effected the separation of Regional and Metropolitan lines between Southern Cross Station, and…
Review of AS 5100.1: Scope and General Principles
AS 5100, the Australian Bridge Design Code, is currently under review. AS 5100.1, Scope and General Principles, sets out the requirements for the design of new bridges, using limit states principles for bridges associated with roads, rail, tramways,…
Seismic Assessment and Strengthening of Reinforced Earth Bridge Abutment and Approach Walls
The Ngauranga Interchange is located at the intersection of two State Highways that provide the only highway access from the surrounding regions to the city of Wellington, New Zealand. Reinforced Earth® walls retain the seaward side of the off-ramp…
Rangiriri Rail Bridges, New Zealand
As part of the ongoing upgrade of timber-piled bridges on the North Island Main Trunk, KiwiRail identified three bridges (BR 280, 281, 282) to be replaced in 2012. These bridges all cross streams of 16 m to 42 m in width and provide a ballast deck…