Publications

Showing 1 - 10 of 187 Publications
Shared Path Bridges over Warringah Road Frenchs Forest, Sydney, Australia
As part of the Northern Beaches Hospital Connectivity and Network Enhancement Project, Warringah Road is being upgraded and widened to accommodate grade separation. The upgrade includes two new shared path bridges, at Forest Way and Hilmer Street,…
Replacement Of Four Long Bridges In Fiji Islands
Four bridges in the Fiji Islands were recently replaced using a Design and Construction procurement method for the Fiji Road Authority. The bridges provided vehicle, pedestrian and Fiji Sugar Corporation cane trains over waterways subjected to…
Hendon Park Footbridge and the Waterview Shared Path Bridges Connecting Communities
The Waterview Connection completes Auckland’s Western Ring Route and is NZ Transport Agency’s largest ever motorway project which also includes a raft of community facilities to re-invigorate the area including a new cycleway network. The shared…
Design of the New Shared Use Path Bridge over the Maribyrnong River Using Weathering Steel
To improve the amenity for cyclists and pedestrians travelling on Melbourne’s second busiest cycle path, a new Shared Use Path (SUP) Bridge has been designed to provide a new and improved crossing of the Maribyrnong River. This new 190 m long and 4.…
Citylink Tulla Widening Project English Street Bridge Demolition and Construction
As part of the CityLink Tulla Widening (CTW) project, the English Street Bridge will be reconstructed to accommodate the widened Tullamarine Freeway and improve access to Essendon Fields. The reconstructed English Street Bridge will be a single span…
Strengthening of Bridges for Higher Productivity Freight Vehicles
Currently there is pressure from the freight industry to allow higher performance freight vehicles (HPFV) the use of major transport routes, particularly between the major centres of Brisbane, Melbourne and Sydney. An initial review of the existing…
2017 Revision of Australian Standard AS 5100 Part 2: Design Loads
Part 2 Design loads of Australian Standard AS 5100 Bridge design sets out the parameters for loads on all bridges in Australia. There have been numerous enhancements to improve the scope, clarity and intent. Design loads for road traffic barriers…
Strengthening and Widening of the Maribyrnong River Bridges
The Maribyrnong River Bridges (also known as E.J. Whitten Bridge), is Victoria’s second largest road bridge being a 520 m long ten span structure that carries the M80 Ring Road over the Maribyrnong River in the outer western suburbs of Melbourne.…
Angellala Creek Bridge: Explosion to Bridge Reconstruction with a BIM Future
On the night of 5th September 2014 a road-train transporting 52 tonnes of ammonium nitrate crashed next to the Angellala Creek Bridge. The bridge is approximately 30km south of Charleville, on the Mitchell Highway in outback Queensland. The incident…
Design and Construction of Rail Grade Separations for an Accelerated Construction Program
The Level Crossing Removal Project Package 1 (LCRP1) has successfully achieved its goal in Connecting Communities through the removal of four level crossings in record time by lowering the rail under road. The simultaneous removal of three of these…