Publications

The addition of a small amount of cementitious binder to non-standard granular materials may result in a fit for purpose base or subbase at a significantly lower cost than crushed rock complying with standard specifications. Such lightly bound…

There is a need to improve Austroads procedures for the structural design of pavements containing lightly bound cemented (LBC) materials. This report describes the findings of an investigation of the performance of Queensland pavements with LBC…

This Test Method determines the susceptibility of aggregate to an expansive reaction when mixed with cement in a concrete mix. It measures the change in length of concrete prisms containing the aggregate under investigation. This Test Method is not…

This Test Method determines the susceptibility of aggregate to an expansive reaction when mixed with cement in a concrete mix. It measures the change in length of representative mortar bars containing the aggregate under investigation during storage…

Austroads Technical Specification ATS 5820 specifies the requirements for the supply and application of anti-graffiti coating systems to structures, roadside furniture and traffic controller boxes. It excludes the application of coating systems to…

This test method determines the performance of anti-graffiti coatings and is based on Main Roads Western Australia Testing Method for Anti-Graffiti Coatings 6706-02-2238. This Test Method assesses the following properties: ease of removing graffiti…

Austroads Technical Specification ATS 5310 sets out the requirements for the supply, fabrication, handling and placement of steel used for the reinforcement of concrete (&lsquo

This webinar, presented on 30 June 2020 by Zia Rice, Tyrone Toole and Lory Noya, looks specifically into the use of the life-cycle costing framework and the important components that are considered for the assessment of an unsealed road. Special…

Austroads Technical Specification ATS 5390 sets out the requirements for the cathodic protection (CP) of steel in atmospherically exposed, buried and submerged concrete. It covers both new and existing structures and includes: assessment of existing…

This session, facilitated by Tyrone Toole, Phil Hunt and Ranita Sen on 17 June 2020, focuses on the life-cycle costing framework and a suite of practical examples to demonstrate how to assess the best use of available marginal and non‑standard…