Publications

This document provides a hyperlinked list of the Austroads Test Methods and Specifications.

This test method is used to measure the ability of a concrete with a maximum coarse aggregate size of 20 mm or less to retain its water under pressure. This test determines the amount of water de-filtered when concrete is subjected to a certain…

Austroads test method 710 describes the procedure for determining the chloride content of select backfill material intended for use in reinforced earth structures. Chloride content is determined by water extraction and titrimetric analysis of the…

This method describes the procedure for obtaining a measure of the evenness of a pavement surface as determined by the deviation from a three metre straightedge. It is applicable only to the measurement of depressions in the pavement surface and to…

This Test Method determines the susceptibility of aggregate to an expansive reaction when mixed with cement in a concrete mix. It measures the change in length of concrete prisms containing the aggregate under investigation. This Test Method is not…

This Test Method determines the susceptibility of aggregate to an expansive reaction when mixed with cement in a concrete mix. It measures the change in length of representative mortar bars containing the aggregate under investigation during storage…

This test method determines the performance of anti-graffiti coatings and is based on Main Roads Western Australia Testing Method for Anti-Graffiti Coatings 6706-02-2238. This Test Method assesses the following properties: ease of removing graffiti…

This test method defines the procedure for locating and identifying surface cracks in a road pavement using an automated crack detection system.

This test method defines the procedure for measuring the deflection velocity of road pavements using a traffic speed deflectometer (TSD) device.

This test method defines the procedure for performing validation checks of the measurements of pavement surface macro-texture determined using a laser profilometer, by comparing them to the measurements from a static or manual reference device.