Publications

Showing 1 - 10 of 32 Publications
Revised Seismic Design Provisions in AS 5100.2
The seismic design provisions in AS 5100 have recently been revised to accord with AS 1170.4:2007. The revised provisions were mainly based on Austroads technical report AP-T200-12, titled Bridge Design Guidelines for Earthquakes .
Next Generation of Facilities for Testing and Inspection of Bridge
This paper studies the mechanical and Data Acquisition performance of a Robotic Transverse Profiler (RTP), designed and built in the partnership between with ARRB and Laboratory of Motion Generation and Analysis for pavement technology study. A…
Bridge-Vehicle Dynamic Interactions: Results from Recent Load Tests
As part of the National Asset Centre of Excellence (NACoE), the Queensland Department of Transport and Main Roads (TMR) with ARRB Group has embarked on a program of research investigating the dynamic interactions between bridges and vehicles. The…
The Torsional Strengthening of Concrete Girders Using the NSM FRP Technique with Different Configurations
The near-surface mounted (NSM) FRP technique has received attention worldwide over the externally bonded FRP strengthening technique. Strengthening of a concrete girders using fiber reinforced polymer (FRP) composites to flexural and shear…
Wigram-Magdala Link Bridge: Low-Damage Details For a More Efficient Seismic Design Philosophy
The aftermath of the Christchurch earthquake highlighted difficulties in the assessment and repair of damaged plastic hinge zones in conventional reinforced concrete structures. Particular issues are uncertainty in strain history, low-cycle fatigue,…
Strength Enhancement of Fire-damaged RC Circular Bridge Columns using CFRP Fabrics
In recent years the circumferential wrapping with externally-bonded carbon fibre-reinforced polymer (CFRP) composites has proven to be a promising method for strengthening concrete structures. This is particularly valuable when repairing concrete…
Monash Freeway Bridge Strengthening Project: Constructability of Carbon Fibre Rods Under Constrained Traffic and Environmental Conditions
Strict environmental requirements and the standard specification and procedure for installing carbon fibre bridge strengthening system have naturally led to the works being undertaken during warmer months and on sections of the bridge that have been…
Thermal Movements of Tasman Bridge
Tasman Bridge crosses the Derwent River joining Hobart to its eastern suburbs. It was built in the early 1960’s and reflects design concepts of the time. It is articulated so that the main viaducts are restrained by the abutments, with very slender…
Lessons from Bridge Performance Due to Ground Damage in Earthquakes
Transportation routes are key lifelines for the community and it is important to learn from damage to bridges in earthquakes. Ground damage was a major contributor to the damage to bridges, in the recent Wenchuan earthquake (China, 2008), the…
Destructive Load Testing of Transversely Stressed Deck Unit Bridges
As part of the NACOE research project ‘Deck unit bridge deck analysis under live load’, a comprehensive load testing program has been conducted in Queensland to investigate the behaviour of transversely stressed precast prestressed concrete deck…