Publications

Filter
Topic
Publication State
Showing 1 - 10 of 274 Publications
Australia and New Zealand Roads Capability Analysis: March 2024 Update
The Australia and New Zealand Roads Capability Analysis: March 2024 Update provides a half-year update to the report published by Austroads in September 2023. It evaluates the skills and capabilities required by Austroads member agencies in the next…
Taking Representative Samples of Bituminous Binders From Road Tankers from Sampling Points Only
This work tip provides guidance on binder sampling to ensure that consistent and reliably representative samples are obtained so that any test results: represent, as near as practicable, an average of a consignment or batch
Guide to Pavement Technology Part 2: Pavement Structural Design
Guide to Pavement Technology Part 2: Pavement Structural Design provides advice for the structural design of sealed road pavements. The advice has been generally developed from the approaches followed by the Austroads member agencies. However, as it…
Webinar: Validation of Superpave™ Method of Asphalt Compaction for Australasia
Austroads has completed a project to replace the obsolete gyratory compactors used in design and quality control testing of asphalt mixes and update its Guide to Pavement Technology Part 4B: Asphalt. Austroads asphalt mix design procedure currently…
Guide to Pavement Technology Part 1: Introduction to Pavement Technology
Guide to Pavement Technology Part 1: Introduction to Pavement Technology provides general information regarding the purpose and function of pavements, pavement types and their components, pavement materials, the types of pavements commonly in use…
Supply of Recycled Crushed Glass Sand
Austroads Technical Specification ATS 3050 sets out the minimum requirements for the manufacture and supply of recycled crushed glass (RCG) for use in the following applications: As a granular material, including: bedding and haunching of pipes and…
Webinar: Australia and New Zealand Roads Capability Analysis 2022-2032
Following previous workforce capability studies undertaken in 2006, 2009, 2013 and 2017, Austroads engaged Oxford Economics Australia to undertake a new workforce capability analysis for member authorities based on planned and forecasted…
Australia and New Zealand Roads Capability Analysis 2022-2032: March 2024 Update
This report evaluates the skills and capabilities required by Austroads member agencies in the next decade to achieve their service objectives. It compares these requirements with the current and projected future workforce, identifies potential…
Webinar: National Harmonisation of Test Methods Used in Asphalt Performance Specifications
The asphalt industry is rapidly evolving, and it is widely accepted that prescriptive specifications are not necessarily well suited to take full advantage of the benefits that new and innovative technologies can provide. There is therefore a desire…
Austroads Members Environment and Sustainability Initiatives Stocktake 2023
Austroads member agencies are actively addressing greenhouse gas emissions and other key environmental issues. This table summarises environmental and sustainability initiatives in place across Australia and New Zealand in 2023. Lighter shaded cells…