Publications

Filter
Topic
Publication State
Showing 1 - 10 of 14 Publications
Webinar: Properties of General-purpose Cement with Increased Percentages of Limestone
This webinar, presented on 15 October 2019, provides an overview of an Austroads project that investigated whether cements with elevated limestone content would perform satisfactorily in ambient-cured and precast concretes subjected to aggressive…
Properties of General-purpose Cement with Increased Percentages of Limestone
This report presents the results of a research project commissioned by Austroads to investigate whether the currently used Australian general-purpose (GP) cement which complies with AS 3972, and which may contain up to 7.5% limestone as a mineral…
Construction of a 50 Metre Long Ultra High Performance Ductile Concrete
One of the most significant breakthrough developments in concrete technology at the end of the 20th century was that of ultra-high performance ‘ductile’ concrete (UHPdC) with compressive strength up to 200 MPa and remarkable improvements in…
ABC-MHB004-11
  • ABC-MHB004-11
  • 31 Oct 2011
  • Bridges
Reinforced concrete made its way into road bridges at the start of the twentieth century after being invented by Joseph Monier in 1875. By 1950 reinforced concrete was dominant for small and medium spans and vying with steel for longer spans. Their…
Specifying Sulfate-Resisting Concrete
The Sulfate-resisting concrete is traditionally specified by cement type and concrete mix proportions in terms of maximum water-cement ratio and/or minimum cement content.
Testing and Specifying Chloride Resistance of Concrete
A wide range of test methods has been used to measure the resistance of concrete to chloride penetration. Each method is purported to measure the property of concrete central to the chloride transport mechanism into concrete. They include water…
Optimising Precast Bridge Girders for Sustainability with the use of High Performance Concrete
The standard Super-T bridge girders used in Australia were developed to provide optimum performance at a time when the maximum concrete grade covered by the bridge design code was 50 MPa. This paper examines the opportunities for improved…
Durability Assessment and Design for 100 Years Life in Aggressive Environments
The Banora Point Upgrade Alliance (BPA) project involves an upgrade of the 2.5 kilometer length of Pacific Highway through Banora Point, in northern NSW. The proposed upgrade will provide a link between the existing Chinderah bypass and Tweed…
RTA Study on the Use of Self-Compacting Concrete
Self-compacting concrete (also known as Super-workable concrete in Australia and Self-consolidating concrete in North America) is defined in EN 206 Part 9: Additional Rules for Selfcompacting Concrete (SCC) as concrete that is able to flow and…
Degradation of Pile Exposed to Acid Sulphate Soil
Durability design of piles is usually carried out based on AS 2159 and AS 3600. It is widely known that the durability of concrete in acid sulphate environments is significantly influenced by the type of binder