Publications

This webinar presents the work involved in developing a standardised comparative risk assessment method for assessing life safety risk of dangerous goods being routed through the tunnel or via an alternative surface route.

Transport Ministers have agreed in-principle to an improved, nationally‑consistent approach to the training and licence progression of heavy vehicle drivers. The approved changes are designed to increase the safety and job‑readiness of heavy vehicle…

This report is one of the three reports produced as part of a project undertaken to establish a comparative risk assessment method for assessing whether a tunnel route is safer than a surface route for the road transit of dangerous goods (DG)…

This report is one of the three reports produced as part of a project undertaken to establish a comparative risk assessment method for assessing whether a tunnel route is safer than a surface route for the road transit of dangerous goods (DG)…

This report is the second of the three reports produced as part of a project undertaken to establish a comparative risk assessment method for assessing whether a tunnel route is safer than a surface route for the road transit of dangerous goods (DG)…

This document provides a hyperlinked list of the Austroads Test Methods and Specifications.

This method describes the procedure for the determination of the surface texture depth of road surfaces, by the sand patch technique. This method is only applicable to surface texture depths greater than 0.3 mm. This method was developed from BS…

For over a decade, the National Telematics Framework has been setting a benchmark as an effective regulatory framework for optimised vehicle movements, making Australia a world-leader in intelligent access management. The National Telematics…

This document describes the procedures to be followed to test an asphalt specimen using a wheel tracking test device. The procedures can be carried out on prismatic specimens that have been manufactured in the laboratory, cut from an existing…

This document describes the procedures to verify that a wheel tracking test device complies with the requirements of those devices permitted for use in Austroads test method ATM 231. The procedures are advisory rather than mandatory and reference…