Publications

There is a need to improve the Austroads procedures for mix design and structural design of foamed bitumen stabilised (FBS) materials. This final report summarises the mix design test methods developed within the context of an Austroads mix design…

This report considers the use of marginal and non-standard materials in road construction and maintenance. It concludes that considerable evidence exists, both nationally and internationally, that supports the wider use of marginal and non-standard…

A new rut resistance approach based on the wheel-tracking test for unbound granular materials has been developed. The objective of the Austroads project TT1819 is to validate the wheel-tracker laboratory approach against large-scale Accelerated…

This report describes the planning and construction of Australian field trials which will measure of the relative performance of polymer modified binders (PMBs) used in strain alleviating membranes in sprayed bituminous sealing. Issues addressed in…

This report clarified the logical architecture required to facilitate the implementation of ‘plug-in’ traffic control software, as an alternative to the control algorithm in the current controller software. The key functional requirements of an…

This report documented current activities amongst road agencies in Australia on the SCATS/STREAMS interface through the SCATS Intelligent Transport System (ITS) Port, and identified a set of 26 functional requirements for this interface to guide the…

Recognising the importance to pavement designers, asset managers and policy makers of an improved understanding of the relationship between different multiple axle group loads (single, tandem, triaxles, etc.) and road pavement performance, Austroads…

Meeting road safety targets will be assisted by the deployment of a range of Intelligent Transport Systems (ITS) technologies which are already available or which will become available over the next few years. A recent Austroads study involved a…

This report reviews current developments in infrastructure-based safety-related ITS, documents their status in Australia and New Zealand, and makes recommendations for future developments in this area. A literature review is presented in which…

This report details the construction of two test pavements which were used for an assessment of fatigue performance of cemented materials under full scale, rolling wheel, accelerated pavement testing (APT). The test pavement consisted of a sand…