Publications

This report details investigations that were conducted to verify the new Austroads sprayed seal design guidelines.

To verify the appropriateness of the proposed basic voids factor (Vf), and the initial sealing design approach (and also to validate…

This report describes research into development of a laboratory sprayed seal binder cracking test which can be used to measure the relative fatigue cracking resistance of thin binder films which have thicknesses comparable to the thicknesses of the…

This report examines the capacity of the extra-large wheel-tracking laboratory test method to predict the in-service performance of granular materials.

Rutting is a common distress mode of unbound granular bases under thin bituminous surfacings.

Five…

EME2 mixes are produced using a hard paving grade bitumen applied at a high binder content (approximately 6%). Compared to conventional asphalt bases with unmodified binders, EME2 asphalt is characterised by high stiffness, high durability, superior…

This report provides a summary of activities completed during 2015–16 for the Austroads long term pavement performance monitoring project.

Austroads has funded the long-term pavement performance study since late 1994. The project monitors the…

This document provides a guide to preparing samples for asphalt mix design to conform to Austroads design processes. It covers splitting of the raw components as well as compacting cylindrical and prismatic samples. The loose asphalt conditioning…

Part 4I: Earthworks Materials provides advice on the general requirements for earthworks materials and the characteristics of material types used in a range of specific applications. The advice has been generally developed from the approaches…

A road trial was established at Gisborne on the Calder Highway. The aim of the trial was to review the performance of sprayed seals constructed from a number of binder types. Class 170 is typically used in Victoria for sprayed seals and a section…