Publications

Filter
Topic
Publication State
Showing 1 - 10 of 18 Publications
Relationships Between Cutter Oil Properties and Sprayed Seal Performance
This study investigated the relationship between cutter oil properties and sprayed seal performance so that this information could be used as a basis for updating Australian Standard 3568. AS 3568 specifies the properties of four different types of…
Properties of General-purpose Cement with Increased Percentages of Limestone
This report presents the results of a research project commissioned by Austroads to investigate whether the currently used Australian general-purpose (GP) cement which complies with AS 3972, and which may contain up to 7.5% limestone as a mineral…
Accelerated Long-term Ageing Methods for Sprayed Sealing Binders: A Field Validation Study
This report presents the results of a field validation study conducted as part of the development of a new long term ageing test for polymer modified binders used in sprayed seals in Australia. Unaged samples of binders were collected during the…
Webinar: Development of a Sprayed Seal Binder Cracking Test
This webinar, presented on 8 August 2019, provides an overview of an Austroads project that developed a new sprayed seal binder cracking test and compared the performance of polymer modified binders (PMBs).
Webinar: Relationships Between Cutter Oil Properties and Sprayed Seal Performance
This webinar, presented on 11 July 2019, provides an overview of an Austroads project that compared the test properties of seven commercially available cutter oils with their sprayed seal performance.
Performance of Asphalt and Spray Grade PMBs in Sprayed Seals
The Australian polymer modified binder (PMB) specification (AGPT/T190) currently requires different binder grades to be used in sprayed sealing and asphalt applications. This study compared the sprayed seal performance of PMBs representing four AGPT/…
Double/Double Primerseal Inspections

This report describes inspections conducted on double/double primerseals constructed in Victoria.

It is not typical practice to use two-layer primerseals, or polymer modification in primerseals, and methods to do so are not described by Austroads…

Inspections of Sprayed Seal Trials

This report details the findings from visual inspections conducted on two Austroads sprayed seal field trials: a non-modified binders trial near Gisborne,

Initial Field Trials with Surface Wear Rig

A mobile pavement surface wear rig has been constructed, which aims to gain an improved understanding of the failure mechanisms that are particular to the pavement surfacing layer – as distinct from the structural layers – that may be caused by…

Good Practice in Reseal Programming

This report provides asset managers with practical guidance in the development and delivery of effective resealing programs. It builds on accumulated experience of previous studies and a review of sprayed seal performance throughout Australasia.