Publications

Filter
Topic
Publication State
Showing 1 - 9 of 9 Publications
Guide to Pavement Technology Part 2: Pavement Structural Design
Guide to Pavement Technology Part 2: Pavement Structural Design provides advice for the structural design of sealed road pavements. The advice has been generally developed from the approaches followed by the Austroads member agencies. However, as it…
Guide to Pavement Technology Part 3: Pavement Surfacings
Guide to Pavement Technology Part 3 addresses the selection of the most appropriate pavement surfacing. The Guide identifies the significant factors that need to be considered in the selection of the most appropriate surfacing, their inter-…
Damage Assessment Criteria for the Classification of Heavy Vehicle Statutory Write-Offs
This Guide has been developed by Austroads and the National Motor Vehicle Theft Reduction Council (NMVTRC) to support the consistent application of special assessment criteria for the classification of heavy written-off vehicles (HWOVs). The…
Damage Assessment Criteria for the Classification of Light Vehicle Statutory Write-Offs
This guide has been developed by the National Motor Vehicle Theft Reduction Council (NMVTRC) and Austroads to support the consistent application of assessment criteria for the classification of written-off vehicles (WOVs). The criteria apply to…
Guide to Pavement Technology Part 5: Pavement Evaluation and Treatment Design
Guide to Pavement Technology Part 5: Pavement Evaluation and Treatment Design provides advice for the investigation of existing sealed road pavements and the selection and design of pavement strategies/treatments. It covers pavement investigation,…
Guide to Pavement Technology Part 4K: Selection and Design of Sprayed Seals
Guide to Pavement Technology Part 4K: Selection and Design of Sprayed Seals is a guide to the procedures for the selection and design of sprayed seals. This is an update of previous Austroads procedures based on the philosophy of filling up voids in…
Guide to Pavement Technology Part 4D: Stabilised Materials
The use of stabilisation technology for stabilising and recycling materials for pavement construction and maintenance is widely accepted as a cost-effective method of improving long‑term performance and reducing whole-of-life costs of modern,…
Guide to Pavement Technology Part 6: Unsealed Pavements
Part 6 of the Guide to Pavement Technology addresses unsealed pavements including operational demands of unsealed road surfaces, pavement configurations, floodways, cuts, fills and mine haul roads, the identification of suitable pavement materials…
Guide to Pavement Technology Part 10: Subsurface Drainage
Part 10: Subsurface Drainage provides advice on the general requirements for drainage materials, design of pavement drains and construction and maintenance considerations. This Part contains information on the types and uses of subsurface drainage…