Publications

This webinar, presented on 31 October 2018, provides an overview of the key changes to the Guide to Pavement Technology Parts 4F and 4K, and the significant advances in the areas of binder specifications and sprayed seal design.

There is a need to improve the Austroads procedures for mix design and structural design of foamed bitumen stabilised (FBS) materials. This final report summarises the mix design test methods developed within the context of an Austroads mix design…

This webinar, presented on 14 June 2018, provides an overview of the updated Austroads microsurfacing guidelines and model specification. It covers: major changes to the microsurfacing guidelines and specifications related test methods materials and…

Guidelines and Specification for Microsurfacing provides guidelines for the use of microsurfacing treatments in Australia. Microsurfacing is presently the only type of bituminous slurry surfacing applied in Australia. The document was produced by…

This webinar, presented on 9 March 2018, provides an overview of the major changes to the design of heavy-duty flexible pavements, including the new: axle-strain approach central to the mechanistic-empirical design method, definitions of design…

This webinar, presented on 27 February 2018, provides an overview of a project Austroads is undertaking to identify gaps in current practice for the performance characterisation of asphalt mixes. The ultimate aim is to develop a harmonised national…

Part 4B of the Austroads Guide to Pavement Technology provides a recommended approach to the design and characterisation of asphalt mixes in Australia and New Zealand. However, the approach to asphalt mix design and performance characterisation…

The Austroads asphalt pavement design process set out in Guide to Pavement Technology – Part 2: Pavement Structural Design (Austroads 2008) utilises a mechanistic procedure to predict the allowable traffic repetitions until asphalt fatigue occurs.…

Part 6 of the Guide to Pavement Technology addresses unsealed pavements including operational demands of unsealed road surfaces, pavement configurations, floodways, cuts, fills and mine haul roads, the identification of suitable pavement materials…

A study of published information regarding the design and development of stone mastic asphalt (SMA) was undertaken. The main focus was upon obtaining information that had resulted in successful SMA mixes. In most instances the design of SMA had used…