Publications

Guide to Pavement Technology Part 5: Pavement Evaluation and Treatment Design provides advice for the investigation of existing sealed road pavements and the selection and design of pavement strategies/treatments. It covers pavement investigation,…

Guide to Pavement Technology Part 4K: Selection and Design of Sprayed Seals is a guide to the procedures for the selection and design of sprayed seals. This is an update of previous Austroads procedures based on the philosophy of filling up voids in…

New methods of using pavement deflection data were developed in the context of pavement structural rehabilitation treatment design. The project focused on two main components. The first was to assess the potential use of traffic speed deflectometer…

This webinar, presented on 22 August 2019, provides an overview of the key changes to the Guide to Pavement Technology Part 5: Pavement Evaluation and Treatment Design and the significant advances in the thickness design of structural treatments for…

The use of stabilisation technology for stabilising and recycling materials for pavement construction and maintenance is widely accepted as a cost-effective method of improving long‑term performance and reducing whole-of-life costs of modern,…

This webinar, presented on 11 April 2019, gives an overview of the key changes to the Guide and the significant advances in the areas of stabilisation or road pavements.

This report presents a review of field trials of WMA technologies conducted in various countries in the world, with the emphasis on performance differences between WMA and conventional HMA and the identification of field performance data that could…

This report describes the planning and conduct of a validation trial of three warm mix asphalt surfacings (chemical additive, polymer additive, foaming) and a hotmix asphalt ‘control’ surfacing at a site in Melbourne, Australia. Issues addressed…

This report provides input to the Austroads project Performance of Warm Mix Asphalt Pavements. It involves a literature review of existing CO2-e emission calculators applicable to road construction (using asphalt products) with a view to…

This report is the fourth in a series which examines the properties of bitumens used in Australia. The bitumen testing program was undertaken to develop a database of selected bitumen samples dating back to 1956. This database has been used to…