Publications

Guide to Pavement Technology Part 5: Pavement Evaluation and Treatment Design provides advice for the investigation of existing sealed road pavements and the selection and design of pavement strategies/treatments. It covers pavement investigation,…

Guide to Pavement Technology Part 4K: Selection and Design of Sprayed Seals is a guide to the procedures for the selection and design of sprayed seals. This is an update of previous Austroads procedures based on the philosophy of filling up voids in…

New methods of using pavement deflection data were developed in the context of pavement structural rehabilitation treatment design. The project focused on two main components. The first was to assess the potential use of traffic speed deflectometer…

This webinar, presented on 22 August 2019, provides an overview of the key changes to the Guide to Pavement Technology Part 5: Pavement Evaluation and Treatment Design and the significant advances in the thickness design of structural treatments for…

The use of stabilisation technology for stabilising and recycling materials for pavement construction and maintenance is widely accepted as a cost-effective method of improving long‑term performance and reducing whole-of-life costs of modern,…

This webinar, presented on 11 April 2019, gives an overview of the key changes to the Guide and the significant advances in the areas of stabilisation or road pavements.

Overseas research has suggested that asphalt fatigue endurance limit may exist, where applied strain is sufficiently low no fatigue damage accumulates in the asphalt as the rate of asphalt healing exceeds the rate of damage accumulation. The…

This document is an update of the design of initial treatments for sprayed seal surfacing.

The information contained within this document supersedes that found in Austroads AP-T68-06 Update of the Austroads Sprayed Seal Design Method, and replaces…

The principal aim of this work was to examine the effect of heavy vehicle loading on sprayed seals, in order to incorporate such loading impacts into the Austroads sprayed seal design method.

The current sprayed seal design method uses an equivalent…

This report describes a literature review on the bitumen/binder specifications and test methods used in Australasia, USA, Europe and South Africa. The project investigated whether the Australian and New Zealand bitumen specifications are adequately…