Publications

Filter
Topic
Publication State
Showing 1 - 10 of 38 Publications
Supply of Recycled Crushed Glass Sand
Austroads Technical Specification ATS 3050 sets out the minimum requirements for the manufacture and supply of recycled crushed glass (RCG) for use in the following applications: As a granular material, including: bedding and haunching of pipes and…
Austroads Test Methods and Specifications
This document provides a hyperlinked list of the Austroads Test Methods and Specifications.
Webinar: Increasing the Use of Recycled Glass in Road Infrastructure
This webinar, presented by Dr James Grenfell and Dr Didier Bodin, focuses on the development of a specification on the supply of recycled crushed glass sand as part of a project to support increased use of recycled crushed glass (RCG) in road…
Surface Deviation Using a Straightedge
This method describes the procedure for obtaining a measure of the evenness of a pavement surface as determined by the deviation from a three metre straightedge. It is applicable only to the measurement of depressions in the pavement surface and to…
Crushing, Processing and Cleaning of Recycled Crushed Glass for Transport Infrastructure
The purpose of this guideline is to provide potential recyclers with the information they need to gain a better understanding of how recycled crushed glass (RCG) should be processed to make it fit-for-purpose for infrastructure applications. This…
Development of a Specification for Recycled Crushed Glass as a Sand Aggregate Replacement
This report presents the technical basis for the development of the Austroads technical specification and guideline for the use of recycled glass in bedding, backfilling material, concrete, road drainage, embankment fill, and landscaping…
Supply of Aggregate for Sprayed Seals
Austroads Technical Specification ATS 3120 sets out the requirements for the supply of aggregates used for sprayed bituminous surfacing work. The technical specification can also be downloaded as a Word document.
Improved Laboratory Characterisation of the Deformation Properties of Granular Materials

This report examines the capacity of the extra-large wheel-tracking laboratory test method to predict the in-service performance of granular materials.

Rutting is a common distress mode of unbound granular bases under thin bituminous surfacings.

Five…

Pavement Crack Measurement with an Automated Crack Detection System
This test method defines the procedure for locating and identifying surface cracks in a road pavement using an automated crack detection system.
Pavement Data Collection with a Traffic Speed Deflectometer (TSD) Device
This test method defines the procedure for measuring the deflection velocity of road pavements using a traffic speed deflectometer (TSD) device.