Skip navigation
Open main navigation
Open/Close Search bar
Search
View Cart
Drivers & Vehicles
Toggle
Drivers & Vehicles
This section includes managing drivers with health risks, requirements for visiting drivers, NEVDIS, and the introduction of connected and automated vehicles to Australasia.
Assessing Fitness to Drive
Vehicles and Technology
NEVDIS
Overseas Drivers
Registration and Licensing
Road Safety & Design
Toggle
Road Safety & Design
This section covers safety barrier assessments, and the work of the Road Safety Task Force and Road Design Task Force.
Barrier Assessment
Road Safety
Road Design
Safety Hardware Training and Accreditation Scheme (ASHTAS)
Transport Operations
Toggle
Transport Operations
In this section you'll find information about our work to improve the efficient, reliable and safe operation of the road network for all road users.
Network Operations
Traffic Management
Temporary Traffic Management
Freight
Active Travel
Transport Infrastructure
Toggle
Transport Infrastructure
This section includes information about strategic asset management, the management of bridges, pavements and tunnels, project delivery and the national prequalification system.
Asset Management
Bridges
National Prequalification
Pavements
Project Delivery
Road Tunnels
Technical Specifications
About
Contact
News
Events
Projects
Publications
Tenders
Login
Home
Publications
Publications
Share
Subject area
All
Materials
Pavement
Test Methods and Specifications
Search publications library
Filter
Open/Close All Filters
Type
Type
Technical Reports
15
Test Methods
1
Work Tips
1
Topic
Topic
Air quality
18
Asphalt
17
Bicycles
19
Binders
19
Binders test methods
19
Bitumen
18
Bituminous mixes test methods
21
Capability assessment
18
Community attitudes
21
Crash analysis
21
Data management
22
Economic evaluation
18
Freight modelling
18
Freight policy
19
Geometric design
18
Heavy vehicle safety
20
Indigenous communities
18
Level of service
21
Materials testing
18
Motorcycles
18
Network management
19
Network operations
18
Noise
19
Older drivers
18
Other assets management
19
Pavement construction
18
Pavement design
20
Pavement investigation test methods
Pavement maintenance
20
Pavement management
24
Pavement performance
Pedestrians
18
Process and documentation
18
Public transport
18
Rural and remote
18
Safe roads
18
Safe vehicles
18
Safety strategy
18
Seals
20
Speed management
19
Strategic asset management
20
Traffic and safety
18
Traffic controls
19
Traffic modelling
19
Year
Year
2024
21
2023
25
2022
24
2021
21
2020
25
2019
29
2018
22
2017
24
2016
41
2015
29
2014
33
2013
45
2012
32
2011
31
2010
30
2009
25
2008
41
2007
31
2006
2005
20
2004
21
2003
23
2002
19
2000
19
1998
18
1997
18
Publication State
Publication State
Archived
3
Live
Sort by:
Relevance
Date (Newest first)
Date (Oldest first)
Title (A-Z)
Title (Z-A)
Publication Code (A-Z)
Publication Code (Z-A)
Showing 1 - 10 of 17 Publications
Pavement investigation test methods
Remove Pavement investigation test methods filter
Pavement performance
Remove Pavement performance filter
2006
Remove 2006 filter
Live
Remove Live filter
Clear all filters
Clear all filters
Fully-matching results
Selection of Additional Sites for Inclusion in Austroads Long Term Pavement Performance (LTPP) Study: Final Report
AP-T71-06
12 Oct 2006
Pavement
More
This report presents the final outcome of an investigation to review, analysis and identify suitable sealed granular pavement sections for inclusion in the LTPP study. The investigation identified 69 sealed granular pavement test sections across…
Asphalt Permeability
AP-T53-06
30 Aug 2006
Pavement
More
This report gives information on the development of a procedure to fractionate bitumen using an Iatroscan liquid chromatography system, and also presents test results on a range of Australian bitumens. An introduction discusses the topic of bitumen…
CoreLok Evaluation
AP-T55-06
30 Aug 2006
Pavement
More
The suitability of the CoreLok device was assessed for estimating the bulk density of compacted asphalt specimens. The device encloses a sample in a plastic bag which is subjected to vacuum and sealed. Results were compared to saturated surface dry…
Review of AS2008 from an Emulsion and PMB Manufacturing Perspective
AP-T51-06
30 Aug 2006
Pavement
More
Australia s specification for paving grade bitumen AS 2008 evolved in the early 1970s from a penetration grading system to one with viscosity control at 60 Degrees Celsius. In support of this primary performance control property, penetration at 25…
Wheeltracking Temperature Sensitivity and Repeatability Investigation
AP-T58-06
30 Aug 2006
Pavement
More
This report describes an investigation into the temperature sensitivity and repeatability of test results obtained using a Cooper wheel tracking device. One set of specimens was tested at the standard temperature (60 Degrees Celsius) and two other…
The Asphaltene content of Australian Bitumens Part 1: Testing of Pre-1992 Samples
AP-T50-06
30 Aug 2006
Pavement
More
The report presents data on the asphaltene content of samples manufactured between 1956 and 1991. Asphaltene content is one of the main chemical properties used to characterise bitumen. Bitumens are generally regarded as colloids whereby clusters of…
Proficiency Exercise: Resilient Modulus
AP-T57-06
30 Aug 2006
Pavement
More
An inter-laboratory proficiency study was conducted based on the resilient modulus test. Participants from Australia and New Zealand were required to test nine asphalt cylinders prepared by a single laboratory. All participants used a MATTA to…
Transducer for the Measurement of Horizontal Stresses at the Tyre Pavement Interface
AP-T49-06
30 Aug 2006
Pavement
More
The move towards performance based specifications (PBS) for the nation s vehicle fleet is expected to result in increased stressing of pavement surfacings. The extent of surface stressing is currently unknown and the capacity of surfacing treatments…
Commissioning a Cooper Wheel Tracking Device
AP-T56-06
30 Aug 2006
Pavement
More
The report documents the procedures used to commission a Cooper wheel tracking apparatus. Practical issues are discussed with emphasis on achieving a repeatable outcome. This involved checking the accuracy of the loading system and the deformation…
Development of a Procedure to Chemically Characterise Bitumens using the Iatroscan
AP-T52-06
30 Aug 2006
Pavement
More
This report gives information on the development of a procedure to fractionate bitumen using an Iatroscan liquid chromatography system, and also presents test results on a range of Australian bitumens. An introduction discusses the topic of bitumen…
1
2
Next
Latest news
3 Jun 2024
Austroads Safety Hardware Training and Accreditation Scheme Mandatory 1 July
21 May 2024
New report details findings of survey of medical practices and practitioners
13 May 2024
Austroads and AfPA update bituminous binder sampling practice guidelines
Sign up for our monthly newsletter RoadWatch Roundup
Name
Email
Hide Feedback button
Feedback
Close
Feedback form
Name
Email
Repeat email address
Telephone
What type of feedback would you like to leave?
Select…
Compliment
Complaint
Suggestion
Feedback text area...
Would you like a response?
Yes
No