Publications

Filter
Topic
Publication State
Showing 1 - 10 of 11 Publications
Webinar: Evaluating the Rutting Performance of Binders
Asphalt pavements are a major component of the Australian and New Zealand road networks. Road agencies in Australia and New Zealand have been putting great efforts to produce pavements which perform and are long-lasting. This has led to the…
Development of the Dynamic Shear Rheometer Consistency 6% Test Method for Polymer Modified Binders
This report describes research work into the development of a new test method utilising the dynamic shear rheometer (DSR) to conduct consistency 6% at 60 
Webinar: Next Generation Asset Data Collection: Road Pavement Performance
The increasing pace of change of technology brings considerable promise of more data, of a higher quality, captured for a lower cost. This has the potential to improve the asset management of roads by enabling better decision making and providing a…
Next Generation Asset Data Collection: Road Pavement Performance
This report identifies and evaluates technology solutions that meet asset management needs relating to road pavement performance. The increasing pace of change of technology brings considerable promise of more data, of a higher quality, captured for…
Validation of Revised Austroads Sprayed Seal Design Approaches: Site Inspection

This report details investigations that were conducted to verify the new Austroads sprayed seal design guidelines.

To verify the appropriateness of the proposed basic voids factor (Vf), and the initial sealing design approach (and also to validate…

Development of a Sprayed Seal Binder Cracking Test

This report describes research into development of a laboratory sprayed seal binder cracking test which can be used to measure the relative fatigue cracking resistance of thin binder films which have thicknesses comparable to the thicknesses of the…

Heavy Vehicle Horizontal Stresses and Pavement Surface Performance

This report presents the findings of Austroads Project AT1540 Understanding the impact on pavement surfaces from next generation freight vehicles and developing practical network prediction models and responses. The main purpose of the project was…

Improved Laboratory Characterisation of the Deformation Properties of Granular Materials

This report examines the capacity of the extra-large wheel-tracking laboratory test method to predict the in-service performance of granular materials.

Rutting is a common distress mode of unbound granular bases under thin bituminous surfacings.

Five…

High Modulus High Fatigue Resistance Asphalt (EME2) Technology Transfer: Final Report

EME2 mixes are produced using a hard paving grade bitumen applied at a high binder content (approximately 6%). Compared to conventional asphalt bases with unmodified binders, EME2 asphalt is characterised by high stiffness, high durability, superior…

Austroads LTPP/LTPPM Study - Summary Report 2015-16

This report provides a summary of activities completed during 2015–16 for the Austroads long term pavement performance monitoring project.

Austroads has funded the long-term pavement performance study since late 1994. The project monitors the…