Publications

This test method describes the procedure for determining the cone penetration of a joint sealant at 25 

This test method describes the procedure for determining the resistance of hot poured joint sealants to flow at a temperature of 70 °

This test method sets out the procedure to be used to prepare joint sealant samples for testing.

This test method describes the procedure for determining the degree to which a joint sealant is degraded by heat during prolonged storage (6 

Austroads Technical Specification ATS 3470 sets out the requirements for: the supply of hot placed elastomeric / crumb rubber joint sealant

This webinar introduces Austroads new projects lined up for the 2022-23 financial year. The session is most beneficial to consultants who may be interested in tendering for Austroads projects. Upcoming projects focus on road network resilience,…

This guide presents information on the application, design, maintenance and recycling of geotextile reinforced seals. The main application is as a surfacing treatment though there is some discussion of use as an interlayer. Two grades of fabric are…

This brief Guide provides advice on the proportion of cutback to be added to conventional bitumen to ensure that an even coating of bitumen is achieved under a variety of climatic and traffic conditions. Notes are provided to assist users when to…

Fibre reinforced seals comprise a sprayed sealing treatment consisting of a layer of glass fibre strands sandwiched between two coats of a polymer modified bituminous emulsion. The fibres are applied randomly to form a mat that resists reflective…

Austroads and the Australian Asphalt Pavement Association (AAPA) have jointly prepared this Guide to the Audit and Surveillance of Sprayed Sealing Contract Works as an aid to promoting good practice in the performance of sprayed sealing work.…