Publications

The Data Standard for Road Management and Investment provides road agencies and their suppliers, in Australia and New Zealand, with a specification for the data that supports common operational activities. The Priority Datasets (PDS) of the Data…

This report presents the findings of site inspections and binder ageing performance studies associated with two Austroads sprayed seal trial sites constructed near Coober Pedy, South Australia and Cooma, New South Wales. These trials were…

This guidance document aims to encourage fit‑for‑purpose use of available materials for sealed and unsealed road construction and maintenance, including renewal of low to medium level traffic roads. A fit‑for‑purpose material has properties and…

This report documents the findings of an Austroads project which aims to encourage sustainable roads through fit-for-purpose use of available materials. The research addressed the use of marginal and non-standard materials in both sealed and…

The temperature sensitivity (K factor) of the ball penetration test is an important parameter in estimating the embedment allowance of the overlaying seal design. A series of ball penetration tests were performed in the laboratory to investigate the…

An Austroads national workshop on stone mastic asphalt (SMA) was held to resolve differences in requirements for SMA in different parts of Australasia. Delegates decided that two mix types were required to cover the desired range of properties.…

This report reviewed various approaches to produce warm mix asphalt (WMA) and their laboratory and field assessments. Reviewed technologies are the foamed mix based products (Aspha-Min, WAM-Foam and LEA), organic additive products (Sasobit,…

A road trial consisting of five different asphalt sections was placed in Brisbane to examine the relationship between rutting in-service and the laboratory wheel tracking test. The trial was placed at the Brisbane City Council quarry at Mount Coot-…

This report provides a general overview of polyphosphoric acid modified binder. A modification mechanism between the acid and binder was proposed. The addition of acid was found to change the chemical compositions of the binder noticeably. The…

This report presents a laboratory assessment of a warm mix produced using an organic additive (Sasobit wax). Three different types of mixes (control, Sasobit dry and Sasobit pre-blend) were produced at various mixing and compaction temperatures…