Publications

This report describes research into the development of a draft Austroads evaluation protocol for rejuvenators. Rejuvenators are typically used to produce asphalt mixes containing high levels of reclaimed asphalt pavement (RAP). The report includes a…

This report, originally published in November 2021, outlines the findings of a project to develop clearer and more consistent tunnel signage to reduce the impact of over-dimensioned and dangerous goods vehicles on both infrastructure and Workplace…

The purpose of this literature review is to assess the current body of research for the incorporation of recycled material in pavements to inform updated guidance to the current Austroads Guide to Pavement Technology Part 4E: Recycled Materials. New…

This report documents a project undertaken to investigate the issues associated with managing the planning, construction, operation and maintenance of road tunnels in a sustainable manner. The results of the investigation informed an update to all…

This report presents the findings of a project that evaluates the fatigue performance of foamed bitumen stabilised (FBS) pavements under accelerated loading. Using accelerated pavement testing, the project evaluated three FBS host materials (100%…

This report presents the technical basis for the development of the Austroads technical specification and guideline for the use of recycled glass in bedding, backfilling material, concrete, road drainage, embankment fill, and landscaping…

This report provides a review on surface characteristics in relation to traffic noise and long-life surfacings. For the conventional asphalt surfacings in general road construction practice, the selection of mix type and size would define two most…

Austroads Project AT1064 Long Term Performance Monitoring and Model Development was initiated in 1994/95. The project was reviewed in 2003 and later in 2007 by GP Youdale Consulting Engineers to assess the project’s program and progress and, if…

The Elastometer is the key testing instrument for PMB specifications in Australia. The Elastometer operating software and data acquisition system were developed in the 1980s, originally to run under DOS and later upgraded to Windows 3.1. This…

A weigh-in-motion (WIM) workshop held in Hobart in March 2008 identified a knowledge gap in regard to the management and operation of WIM equipment and associated data. Austroads Project AT1482 aims to fill this gap through establishing national…