Publications

This report describes research into the development of a draft Austroads evaluation protocol for rejuvenators. Rejuvenators are typically used to produce asphalt mixes containing high levels of reclaimed asphalt pavement (RAP). The report includes a…

This report, originally published in November 2021, outlines the findings of a project to develop clearer and more consistent tunnel signage to reduce the impact of over-dimensioned and dangerous goods vehicles on both infrastructure and Workplace…

The purpose of this literature review is to assess the current body of research for the incorporation of recycled material in pavements to inform updated guidance to the current Austroads Guide to Pavement Technology Part 4E: Recycled Materials. New…

This report documents a project undertaken to investigate the issues associated with managing the planning, construction, operation and maintenance of road tunnels in a sustainable manner. The results of the investigation informed an update to all…

This report presents the findings of a project that evaluates the fatigue performance of foamed bitumen stabilised (FBS) pavements under accelerated loading. Using accelerated pavement testing, the project evaluated three FBS host materials (100%…

This report presents the technical basis for the development of the Austroads technical specification and guideline for the use of recycled glass in bedding, backfilling material, concrete, road drainage, embankment fill, and landscaping…

The Data Standard for Road Management and Investment provides road agencies and their suppliers, in Australia and New Zealand, with a specification for the data that supports common operational activities. The Priority Datasets (PDS) of the Data…

This report presents the findings of site inspections and binder ageing performance studies associated with two Austroads sprayed seal trial sites constructed near Coober Pedy, South Australia and Cooma, New South Wales. These trials were…

This guidance document aims to encourage fit‑for‑purpose use of available materials for sealed and unsealed road construction and maintenance, including renewal of low to medium level traffic roads. A fit‑for‑purpose material has properties and…

This report documents the findings of an Austroads project which aims to encourage sustainable roads through fit-for-purpose use of available materials. The research addressed the use of marginal and non-standard materials in both sealed and…