Publications

This paper examines the initiative by the Australian Steel Institute to underwrite development of the new Australian Standard AS/NZS 5131 ‘Structural Steelwork – Fabrication and Erection’, the new ‘National Structural Steelwork Specification (NSSS)…

Across the globe, a huge sum is spent each year in maintaining and protecting steel infrastructure assets against corrosion. Most of the steel assets are protected using protective coatings or coating systems.

Durability assessment is increasingly becoming an integral part of infrastructure design projects in Australia. One of the key drivers for this is the requirement by asset owners for optimum whole of life cost, minimum construction period and…

Weathering steel is a high strength low alloy steel that, in a suitable environment, may be left unpainted due to the formation of an adherent protective rust “patina”. This patina significantly retards the corrosion rate, which is 5 to 10 times…

The near-surface mounted (NSM) FRP technique has received attention worldwide over the externally bonded FRP strengthening technique. Strengthening of a concrete girders using fiber reinforced polymer (FRP) composites to flexural and shear…

Carbon-fibre-reinforced-polymer (CFRP) strengthening of steel components with tensile cracks has gained significant attention in the civil engineering applications due to the advantages of the composite material in upgrading the performance level of…

In recent years the circumferential wrapping with externally-bonded carbon fibre-reinforced polymer (CFRP) composites has proven to be a promising method for strengthening concrete structures. This is particularly valuable when repairing concrete…

Strict environmental requirements and the standard specification and procedure for installing carbon fibre bridge strengthening system have naturally led to the works being undertaken during warmer months and on sections of the bridge that have been…

A new steel/concrete composite girder was proposed and applied to continuous girder bridges. The area surrounded by the upper and lower flanges and the web are filled with concrete (CFIG: Concrete filled I-section Girder) at the intermediate support.…

The span length and general size of bridges across the Queensland road Network have increased substantially in recent years. This has led to the development of larger girder section sizes, along with the requirement to provide increased amounts of…