Publications

The test method specifies procedures for the characterisation of the stiffness and fatigue behaviour of bituminous mixtures using a four-point bending test configuration.

This method has been developed for extracting bituminous binders from bituminous mixtures i.e. asphalt field samples, loose plant mix or reclaimed asphalt pavement.

This test method sets out the procedure for the determination of viscosity of binders recovered from RAP source materials, as well as of virgin binders and rejuvenators. The viscosity is determined under specific conditions of oscillation loading,…

This method describes the procedure for the determination of the surface texture depth of road surfaces, by the sand patch technique. This method is only applicable to surface texture depths greater than 0.3 mm. This method was developed from BS…

This document describes the procedures to be followed to test a sample of asphalt using a wheel tracking test device. The procedures can be carried out on prismatic specimens that have been manufactured in the laboratory, cut from an existing…

This document describes the procedures to be followed to verify that a wheel tracking test device complies to the requirements of those devices permitted for use by Austroads Test Method AGPT-T231. The procedures are advisory rather than mandatory…