Publications

This test method sets out the procedure for determining the amount of binder drain-off likely to occur in an asphalt mix during storage and transport. The method may be used to determine the amount of binder drain-off at the maximum mixing…

This test method sets out the procedure for determining the quantity of loose aggregate on the surface of a sprayed seal.

This method describes the procedure for the recovery of sprayed seal samples from the pavement without disturbing the sealing aggregate orientation. The method stipulates how the void content of the sample is determined.

This test method sets out the procedure for assessing the degree of absorption of a primer or primerbinder by a given road gravel in bituminous surfacing work.

This test method sets out the procedure for determination of the softening point of polymer modified binders.

This method describes a procedure for determining the bulk density of crumb rubber in the size range 600 to 300 µm.

This method describes a procedure for determining whether a PMB can be easily returned to a homogeneous state after subjecting a sample of the PMB to an elevated temperature for a prolonged period. This ease of remixing is assessed by determining…

This test method details the requirements for determining the flexural stiffness, phase angle, dissipated energy per cycle, cycles to failure and cumulative dissipated energy at failure of asphalt subjected to repeated flexure by cyclical four-point…