Publications

This test method defines the procedure for conducting repeatability and bias measurement checks for roughness measurements made by an inertial profilometer.

This test method defines the procedure for conducting repeatability and bias of measurement checks for rut measurements made by a laser profilometer.

This test method defines the procedure for conducting repeatability and bias of measurement checks for pavement surface texture measurements made by a laser profilometer.

This specification provides minimum equipment, calibration, validation and survey method requirements for the conduct of network level pavement surface texture measurement using a laser profilometer.

This specification provides minimum equipment, calibration, validation and survey method requirements for the conduct of network level pavement rutting measurement using a laser profilometer.

This test method defines the procedure for measuring the roughness of road pavements, determined from the direct measurement of the longitudinal profile of the road surface using an inertial profilometer.

The ARRB TR Walking Profiler is pushed over the pavement surface by an operator at a slow walking pace. It is assumed that the reader is familiar with the Walking Profiler Instruction Manual published by ARRB Transport Research and/or has a copy…

This specification provides minimum equipment, calibration, validation and survey method requirements for the conduct of network level pavement deflection testing using a Falling Weight Deflectometer (FWD).

This specification provides minimum equipment, calibration, validation and survey method requirements for the conduct of network level pavement deflection testing using a deflectograph.

This test method sets out the procedure for determining the quantity of loose aggregate on the surface of a sprayed seal.