Publications

Robert Bird Group (RBG) was engaged by the CBGU JV to design a new pedestrian and cycle bridge over the rail corridor providing a connection between Joe Baker Street, adjacent the new Boggo Road Station and Kent Street, adjacent the Princess…

Vehicle crashes have been identified as the most critical bridge risk in New Zealand, contributing to more bridge related deaths per annum than floods, earthquakes, vehicle overload and deterioration combined. In recent years the Australian and New…

In recent years, there has been a significant growth in the new and extension of railway lines in Victoria. This has resulted in an increase need for rail viaducts due to narrow rail corridors in heavily built up suburban areas. Traditional railway…

This test method sets out the procedure for determining the apparent viscosity of PMBs at temperatures above 100°C, using the Brookfield Thermosel rotational viscometer.

This test method applies to polymer modified binders, polymers and crumb rubber.Materials are sampled according to this protocol to ensure that correct sampling procedures are followed and that test results provide the required information on…

This test method sets out the procedure for the determination of the flash point of polymer modified binders (PMBs). This test method is applicable to PMBs used in the construction and maintenance of pavements (as specified in ATS 3110).

This test method is applicable to all binders that do not have a viscous response at 70°C and at long loading times when confined to film thicknesses in the range 0.1 to 1mm. It is applicable to all modified binders.

This test method sets out the procedure for the determination of mass change or loss on heating of a polymer modified binder (PMB) due to the effect of heat and air during rolling thin film oven (RTFO) treatment.

This method complements AS/NZS 2341.21 by setting out the handling procedures for the testing of modified binders.

This test method sets out the procedure for the determination of torsional recovery of polymer modified binders (PMBs) under specific conditions using a simple torsional recovery test apparatus. PMBs are thought to provide benefits due to their…