Publications

The Australian polymer modified binder (PMB) specification (AGPT/T190) currently requires different binder grades to be used in sprayed sealing and asphalt applications. This study compared the sprayed seal performance of PMBs representing four AGPT/…

This test method sets out the procedures for the measurement of the stress ratio of binder samples under specific conditions using the dynamic shear rheometer (DSR). A major failure mode of sprayed seals and asphalt pavements is fatigue cracking of…

Guide to Bridge Technology Part 1 provides general information about bridge design and construction. Topics covered in this Part include factors affecting bridge performance, their relationship to bridge design standards, and the evolution of…

This report provides the results of testing of three potentially reactive aggregates by the accelerated mortar bar test (AMBT) and the concrete prism test (CPT).

The tests were conducted using reference mixes, which contained plain Portland cement as…

This test method sets out the procedures for the ageing treatment of bitumen samples under specific conditions using the Pressure Ageing Vessel (PAV), and also the determination of the complex viscosity of treated samples under specific conditions…

The seismic design provisions in AS 5100 have recently been revised to accord with AS 1170.4:2007. The revised provisions were mainly based on Austroads technical report AP-T200-12, titled Bridge Design Guidelines for Earthquakes .

This paper studies the mechanical and Data Acquisition performance of a Robotic Transverse Profiler (RTP), designed and built in the partnership between with ARRB and Laboratory of Motion Generation and Analysis for pavement technology study. A…

As part of the National Asset Centre of Excellence (NACoE), the Queensland Department of Transport and Main Roads (TMR) with ARRB Group has embarked on a program of research investigating the dynamic interactions between bridges and vehicles. The…

The aftermath of the Christchurch earthquake highlighted difficulties in the assessment and repair of damaged plastic hinge zones in conventional reinforced concrete structures. Particular issues are uncertainty in strain history, low-cycle fatigue,…

Transportation routes are key lifelines for the community and it is important to learn from damage to bridges in earthquakes. Ground damage was a major contributor to the damage to bridges, in the recent Wenchuan earthquake (China, 2008), the…