Publications

This report describes research into development of a laboratory sprayed seal binder cracking test which can be used to measure the relative fatigue cracking resistance of thin binder films which have thicknesses comparable to the thicknesses of the…

This report examines the capacity of the extra-large wheel-tracking laboratory test method to predict the in-service performance of granular materials.

Rutting is a common distress mode of unbound granular bases under thin bituminous surfacings.

Five…

EME2 mixes are produced using a hard paving grade bitumen applied at a high binder content (approximately 6%). Compared to conventional asphalt bases with unmodified binders, EME2 asphalt is characterised by high stiffness, high durability, superior…

This test method sets out the procedures for the ageing treatment of bitumen samples under specific conditions using the Pressure Ageing Vessel (PAV), and also the determination of the complex viscosity of treated samples under specific conditions…

This report provides a summary of activities completed during 2015–16 for the Austroads long term pavement performance monitoring project.

Austroads has funded the long-term pavement performance study since late 1994. The project monitors the…

This report describes the results obtained during the second year of work (2015–16) into the development of a binder test that can rank the low temperature cracking performance of PMBs.

Studies conducted during the first year of work (2014–15)…

This report describes a literature review on the permeability of sprayed seal surfacings. This review work was conducted to explore the permeability limits of sprayed seal surfacings, and to determine the influencing factors which allow seals to…

The principal aim of this work was to examine the effect of heavy vehicle loading on sprayed seals, in order to incorporate such loading impacts into the Austroads sprayed seal design method.

The current sprayed seal design method uses an equivalent…

This report describes a literature review on the bitumen/binder specifications and test methods used in Australasia, USA, Europe and South Africa. The project investigated whether the Australian and New Zealand bitumen specifications are adequately…

This test method sets out the procedures for the determination of the force ratio and toughness of bitumen and PMBs under specific conditions of deformation using the ARRB extensiometer.