Publications

This webinar, presented on 31 October 2018, provides an overview of the key changes to the Guide to Pavement Technology Parts 4F and 4K, and the significant advances in the areas of binder specifications and sprayed seal design.

There is a need to improve the Austroads procedures for mix design and structural design of foamed bitumen stabilised (FBS) materials. This final report summarises the mix design test methods developed within the context of an Austroads mix design…

Guide to Pavement Technology Part 4F: Bituminous Bindersprovides guidance on the use of bituminous materials in road construction and maintenance. Bituminous materials include bitumen obtained from refining crude petroleum oil and products derived…

This paper examines the initiative by the Australian Steel Institute to underwrite development of the new Australian Standard AS/NZS 5131 ‘Structural Steelwork – Fabrication and Erection’, the new ‘National Structural Steelwork Specification (NSSS)…

Across the globe, a huge sum is spent each year in maintaining and protecting steel infrastructure assets against corrosion. Most of the steel assets are protected using protective coatings or coating systems.

Weathering steel is a high strength low alloy steel that, in a suitable environment, may be left unpainted due to the formation of an adherent protective rust “patina”. This patina significantly retards the corrosion rate, which is 5 to 10 times…

Carbon-fibre-reinforced-polymer (CFRP) strengthening of steel components with tensile cracks has gained significant attention in the civil engineering applications due to the advantages of the composite material in upgrading the performance level of…

The Huntly Section is a new NZ$415M section of the Waikato Expressway running between Hamilton and Auckland. It will connect the recently completed Ngaruawahia and Ohinewai sections on a route that traverses the Taupiri Ranges within a deep cutting…

A new steel/concrete composite girder was proposed and applied to continuous girder bridges. The area surrounded by the upper and lower flanges and the web are filled with concrete (CFIG: Concrete filled I-section Girder) at the intermediate support.…

Steel in bridge construction in Australia has declined significantly over the last 40 years from around 25% of bridges to as low as 5% of bridges in recent years. The main reasons for this have been the proliferation of precast prestressed concrete…