Publications

This test method sets out the procedure to be used to prepare joint sealant samples for testing.

This test method describes the procedure for determining the degree to which a joint sealant is degraded by heat during prolonged storage (6 

The characterisation of the flexural stiffness and fatigue behaviour of bituminous mixtures in Australia and New Zealand is undertaken using a four-point bending (4PB) configuration. This document describes the procedures to be followed to verify…

This test method sets out procedures for the preparation of asphalt specimens and measuring the change in indirect tensile strength resulting from the effects of moisture and freeze/thaw conditioning. The results can be used to assess the propensity…

The test method outlines the procedure for determining the permeability of a water-saturated asphalt specimen in the laboratory using the ponding method. The test method was primarily developed for dense-graded, stone mastic and gap-graded asphalt…

Guide to Road Design Part 1 provides practitioners with a detailed description of the critical aspects of road design.

Austroads has recently completed a project to consolidate the previous Guide to Road Design Part 1: Introduction to Road Design, Part 2: Design Considerations and Part 8: Process and Documentation into a new Part 1: Objectives of Road Design. This…

This document describes the procedures to be followed for compacting asphalt specimens using a gyratory compactor.

This webinar, presented by Ann-Marie Head and Jeanette Ward, focuses on the planning and design considerations for walkable residential neighbourhoods, both new and existing, and where to find that guidance in Austroads&rsquo

This webinar, presented by Ann-Marie Head and Jeanette Ward,