Publications

This method sets out the procedure for determining the degree of stripping of a single coat sprayed seal with a nominal aggregate size of 10 mm or larger.

This webinar, presented on 3 September 2019, provides an overview of the concept of Mobility as a Service (MaaS) and the opportunities it presents for transport agencies in Australia and New Zealand (ANZ).

Mobility as a Service, referred to as ‘MaaS’, represents the opportunity for all available public and private transport services to be integrated and bundled into a platform directly accessible by the individual travellers through their mobile…

The 2016 Austroads Congestion and Reliability Review (AP-R534-16) measured the levels of congestion across major cities in Australia and New Zealand, assessed the key causes of congestion, and proposed an approach to identifying and assessing…

This webinar, presented on 16 July 2019, provides an overview of opportunities to apply artificial intelligence to road network operations.

This protocol specifies the method for sampling bituminous slurry mixture from the slurry paving unit at the paving site.

This test method sets out the procedure to evaluate the wearing resistance of bituminous slurry surfacing materials under wet abrasion conditions.

This test method sets out the procedure to evaluate bituminous slurry materials for their propensity for binder flushing after subjecting to loaded wheel tracking cycles.

This test method sets out the method for the determination of the setting and curing characteristics of a bituminous slurry as a function of the cohesive strength developed in the mixture with time.

This test method sets out the procedure to determine the consistency of a bituminous slurry that is then used to optimise the amount of water required to form a workable mixture. This test may not be applicable to certain microsurfacing mixtures due…