Publications

This test method describes the procedure for determining the degree to which a joint sealant is degraded by heat during prolonged storage (6 

The characterisation of the flexural stiffness and fatigue behaviour of bituminous mixtures in Australia and New Zealand is undertaken using a four-point bending (4PB) configuration. This document describes the procedures to be followed to verify…

This test method sets out procedures for the preparation of asphalt specimens and measuring the change in indirect tensile strength resulting from the effects of moisture and freeze/thaw conditioning. The results can be used to assess the propensity…

The test method outlines the procedure for determining the permeability of a water-saturated asphalt specimen in the laboratory using the ponding method. The test method was primarily developed for dense-graded, stone mastic and gap-graded asphalt…

Austroads Guide to Traffic Management (AGTM) has been a valuable resource for industry, particularly amongst traffic engineering and operations cohorts. The transport context is evolving rapidly, and a strategic review identified that a new approach…

This study aims to set a clear plan for the evolution of the Austroads Guide to Traffic Management to ensure it continues to meet the needs of users and remains a critical resource for member agencies and industry. The study was undertaken over…

This document describes the procedures to be followed for compacting asphalt specimens using a gyratory compactor.

An Austroads study of Australian and New Zealand roads capability (AP-R574-18) identified capability/learning gaps amongst graduates and novice practitioners in traffic management. The 2018 study also confirmed that road agencies are experiencing…

This report documents a project addressing a recognised lack of traffic management knowledge and skills in young practitioners through the development of a series of online learning modules in traffic management. This report brings together the…

Austroads has recently completed a project to review and propose improvements to the guidance on interrupted traffic flow theory contained within the Austroads Guide to Traffic Management (AGTM), Part 2 and Part 3. The updates will broaden…