Publications

This test method describes the procedure for determining the resistance of hot poured joint sealants to flow at a temperature of 70 °

This test method sets out the procedure to be used to prepare joint sealant samples for testing.

This test method describes the procedure for determining the degree to which a joint sealant is degraded by heat during prolonged storage (6 

Austroads has published a report proposing a set of symbols for low and zero emission vehicles (LZEVs) and associated charging or refuelling infrastructure to be used on road signs and for road marking in Australia and New Zealand. The proposal…

Physical road infrastructure such as pavement markings and signals may have an important role to play to support the uptake of automated vehicles (AVs). Austroads has recently completed a project to provide road agencies with clear advice on…

The characterisation of the flexural stiffness and fatigue behaviour of bituminous mixtures in Australia and New Zealand is undertaken using a four-point bending (4PB) configuration. This document describes the procedures to be followed to verify…

This test method sets out procedures for the preparation of asphalt specimens and measuring the change in indirect tensile strength resulting from the effects of moisture and freeze/thaw conditioning. The results can be used to assess the propensity…

The test method outlines the procedure for determining the permeability of a water-saturated asphalt specimen in the laboratory using the ponding method. The test method was primarily developed for dense-graded, stone mastic and gap-graded asphalt…

These reports provide guidance on infrastructure investment to help transport agencies achieve timely, consistent and adequate infrastructure readiness for the operation of current and future automated vehicles. Physical road infrastructure such as…

The Austroads Road Authority Data for Connected and Automated Vehicles (RADCAV) project studied the provision of agency-owned data to connected and automated vehicles (CAVs) addressing six high-priority data sets: roadworks, incidents, variable…