Publications

Filter
Topic
Publication State
Showing 21 - 30 of 212 Publications
Surface Deviation Using a Straightedge
This method describes the procedure for obtaining a measure of the evenness of a pavement surface as determined by the deviation from a three metre straightedge. It is applicable only to the measurement of depressions in the pavement surface and to…
Stripping Potential of Asphalt – Tensile Strength Ratio
This test method sets out procedures for the preparation of asphalt specimens and measuring the change in indirect tensile strength resulting from the effects of moisture and freeze/thaw conditioning. The results can be used to assess the propensity…
Verification Procedure for the Four-point Bending Test
The characterisation of the flexural stiffness and fatigue behaviour of bituminous mixtures in Australia and New Zealand is undertaken using a four-point bending (4PB) configuration. This document describes the procedures to be followed to verify…
Laboratory Assessment of Asphalt Permeability
The test method outlines the procedure for determining the permeability of a water-saturated asphalt specimen in the laboratory using the ponding method. The test method was primarily developed for dense-graded, stone mastic and gap-graded asphalt…
Laboratory Fatigue Characterisation of Foamed Bitumen Stabilised Materials
This report documents a project to develop a new laboratory fatigue relationship to predict the performance of foamed bitumen stabilised (FBS) materials. The project focused on extensive laboratory experiments including indirect tensile testing and…
Agency Business Capability Model to Support Connected Vehicles
This report presents an agency business capability model to support connected vehicles. The model defines the required agency business capabilities and associated capability maturity target states from business and technology perspectives. Connected…
Webinar: Road Authority Data for Connected and Automated Vehicles
The Austroads Road Authority Data for Connected and Automated Vehicles (RADCAV) project studied the provision of agency-owned data to connected and automated vehicles (CAVs) addressing six high-priority data sets: roadworks, incidents, variable…
Road Authority Data for Connected and Automated Vehicles: Guidance for Agency Data Provision to Connected and Automated Vehicles
These eight reports provide guidance on the provision of agency-owned data to connected and automated vehicles (CAVs). Six high-priority data sets are addressed: roadworks, incidents, variable speed limit signs and lane control signals, static speed…