Publications

This Pavement Work Tip provides guidelines for the preparation of granular pavements prior to priming or primersealing.

Over the last decade a considerable amount of research effort has been focussed on the development of a repeated load triaxial (RLT) test procedure to assist practitioners in the use of natural and marginal unbound base/subbase materials in road…

Part 6 of the Guide to Pavement Technology addresses unsealed pavements including operational demands of unsealed road surfaces, pavement configurations, floodways, cuts, fills and mine haul roads, the identification of suitable pavement materials…

This Guide contains advice on the selection, testing and specification of crushed rock and naturally occurring granular materials for use in pavement base and subbase construction.

Part 4J of the Guide to Pavement Technology provides information and guidance on: the classification and description of source rocks

This report presents the results of testing conducted on an unbound granular pavement with a thin bituminous surfacing using a variety of tyre types and half-axle loads applied using the Accelerated Loading Facility. It was found that the reference…

Improved RD models for sealed granular and asphalt pavements are needed. Pavement performance history data from state road authorities and New Zealand (SRAs) were used for calibrating RD models. The calibration and refinement of RD models is…

Over the last decade a considerable amount of research effort has been focussed on the development of a repeated load triaxial (RLT) test procedure to assist practitioners in the use of natural and marginal unbound base/subbase materials in road…

The objective of this report is to provide data relating the laboratory repeated load triaxial test (RLT) results to field performance and to develop procedures for incorporation of RLT test results into performance-based specifications and…

The Austroads Member Authorities (AMAs) are developing a Performance Based Specification (PBS) approach to the specification of unbound granular materials in Australia and New Zealand. There has been general agreement to adopt the engineering…