Publications

The use of stabilisation technology for stabilising and recycling materials for pavement construction and maintenance is widely accepted as a cost-effective method of improving long‑term performance and reducing whole-of-life costs of modern,…

This webinar, presented on 11 April 2019, gives an overview of the key changes to the Guide and the significant advances in the areas of stabilisation or road pavements.

This test method describes the methods for the determination of the flexural modulus, strength and fatigue characteristics of laboratory‑manufactured cemented materials using four point bending techniques.

This webinar, presented on 17 July 2018, outlines ways to optimise the use of marginal and non-standard materials and gain best value from the successful performance of standard materials. It covers: applying a proposed assessment process to a wider…

There is a need to improve the Austroads procedures for mix design and structural design of foamed bitumen stabilised (FBS) materials. This final report summarises the mix design test methods developed within the context of an Austroads mix design…

This report considers the use of marginal and non-standard materials in road construction and maintenance. It concludes that considerable evidence exists, both nationally and internationally, that supports the wider use of marginal and non-standard…

The report provides a summary of works undertaken during the period 2016–17 for the Austroads project AT1064 – Long-term pavement performance (LTPP).

Austroads has funded the long-term pavement performance study since late 1994. The project monitors…

This report details investigations that were conducted to verify the new Austroads sprayed seal design guidelines.

To verify the appropriateness of the proposed basic voids factor (Vf), and the initial sealing design approach (and also to validate…

This report describes research into development of a laboratory sprayed seal binder cracking test which can be used to measure the relative fatigue cracking resistance of thin binder films which have thicknesses comparable to the thicknesses of the…

This report examines the capacity of the extra-large wheel-tracking laboratory test method to predict the in-service performance of granular materials.

Rutting is a common distress mode of unbound granular bases under thin bituminous surfacings.

Five…