Publications

This webinar, presented on 11 April 2019, gives an overview of the key changes to the Guide and the significant advances in the areas of stabilisation or road pavements.

This webinar, presented on 17 July 2018, outlines ways to optimise the use of marginal and non-standard materials and gain best value from the successful performance of standard materials. It covers: applying a proposed assessment process to a wider…

There is a need to improve the Austroads procedures for mix design and structural design of foamed bitumen stabilised (FBS) materials. This final report summarises the mix design test methods developed within the context of an Austroads mix design…

This report considers the use of marginal and non-standard materials in road construction and maintenance. It concludes that considerable evidence exists, both nationally and internationally, that supports the wider use of marginal and non-standard…

A new rut resistance approach based on the wheel-tracking test for unbound granular materials has been developed. The objective of the Austroads project TT1819 is to validate the wheel-tracker laboratory approach against large-scale Accelerated…

This report describes the planning and construction of Australian field trials which will measure of the relative performance of polymer modified binders (PMBs) used in strain alleviating membranes in sprayed bituminous sealing. Issues addressed in…

Recognising the importance to pavement designers, asset managers and policy makers of an improved understanding of the relationship between different multiple axle group loads (single, tandem, triaxles, etc.) and road pavement performance, Austroads…

Part 6 of the Guide to Pavement Technology addresses unsealed pavements including operational demands of unsealed road surfaces, pavement configurations, floodways, cuts, fills and mine haul roads, the identification of suitable pavement materials…

Part 10: Subsurface Drainage provides advice on the general requirements for drainage materials, design of pavement drains and construction and maintenance considerations. This Part contains information on the types and uses of subsurface drainage…

This report details the construction of two test pavements which were used for an assessment of fatigue performance of cemented materials under full scale, rolling wheel, accelerated pavement testing (APT). The test pavement consisted of a sand…